Menu
Cart 0
LED Strip/Tape Light Double Density 3528 SMD IP33 or IP65 Rated, 600 LEDs, 5 Meters - Assorted Colours has a rating of 4.5 stars based on 2 reviews.

LED Strip/Tape Light Double Density 3528 SMD IP33 or IP65 Rated, 600 LEDs, 5 Meters - Assorted Colours

  • $19.99
  • Save $20


Add lighting and colour to any decor

LED Strip/Tape lights are very popular with both the DIY crowd and professionals due to their versatility, convenience, cost and ease of installation.  You can add task lighting to counters, change the mood of a room or add safety lighting in a relatively quick time.

These strips are bright, customizable and is available in either a Raw IP33 Rated (not water-resistant) or a Silicon Coated IP65 Rated (water-resistant) strips. 

Features:
  • Low power consumption,
  • Super-bright with low running temperature
  • IP33 rating, no silicone, protection from bumps from person or tools larger than 2.5mm and protection against spraying water at up to 60 fl from the vertical direction.
  • IP65 rating, silicone coated, complete protection against entry of dust and protection against low pressure jets of water from all directions. (not submersible or prolonged direct water contact)
  • Peel and Stick, self-adhesive backing with for secure and easy application
  • Size adjustable - lights can be cut to fit the size of your project (cut lines every 3 LED lights) or they can be extended by attaching another roll or cut length of LED Strip (either by soldering or using LED quick connectors)
  • Long lifespan  - approximately 50,000* hours (*depending on application/installation)

Specs:

  • View angle:120° 
  • Working Voltage: 12VDC
  • LED Quantity: 600 LED chips per 5 Meter Roll - 120 LED chips per 1 Meter
  • Working Temperature:-20 to 50°
  • Protection Rate:  IP33 Raw or IP65 (water-resistant)
  • Size: L500cm (5M) x W 1cm x T0 H 0.25cm 
  • LED Type: 3528
  • PCB Background: White
 Package Content:

1  x Roll LED Lights - 5 Meters (16ft) continuous length

Installation Note: 

  • For home or garden use, please note this strip light cannot be plugged into the mains on a house directly!! There are two bare wire at the end of each led strip, you will need a Power Adapter Plug and a Power Supply (both sold separately) to provide power to the lights.
  • For vehicle or boat use, the voltage from the battery is 12v DC already so you can install it directly, no need for an additional adapter or power supply.
  • For use around water or wet environments (IP65 Rated Strips or higher), such as in aquarium or pond or garden, please note that the IP65 Rating does not allow you to submerge the lights in the water and the power supply, adapters or connectors must be kept away from any forms of water and secured in a duck or waterproof electrical box. 
  • Each LED strip has positive and negative wire
  • The LED strips do not require any resistors, they are ready to work on any 12 volt power source. 

We also carry optional AC Power Adapters, Remote Controls, Quick Connectors, Extension Wire and Housings.


We Also Recommend

};